Care And Maintenance - HQ Power HQSA1009 Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

Wireless Function

Press the mode button to select the wireless function. The speaker will beep twice.

Activate the wireless function on your mobile phone and search for the speaker

HQSA1009. Pair the speaker to your phone. Enter password 0000 if necessary.

You can now play music files from your mobile phone. Control the track from your

mobile phone and adjust the volume level with the volume knob on the speaker or

mobile phone.

FM Radio

The included audio cable acts as an antenna. Insert the audio cable into the aux

input prior to selecting the FM radio. Make sure to remove the USB stick before

selecting the FM mode.

Next, press the mode button to select the FM radio.

In playing mode, short press the play/pause button to auto search and store the

FM frequencies. Select the channel with the backward/forward button.

Aux/Mic/Guitar Inputs

Insert the audio cable into the aux input and select the aux function using the

mode button.

Connect your auxiliary device to the speaker. Control all functions from your

auxiliary device except for the volume control.

Connect your microphone or guitar to the respective microphone or guitar input.

Adjust the volume using the mic volume button. Note that this function cannot be

used while the FM radio is playing.

The speaker has six pre-programmed EQ settings. To select an EQ setting, short press

the on-off knob several times. The selected EQ setting will briefly appear on the display

as Normal  Rock  Pop  Classic  Jazz  Country and back to Normal  ...