Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FCC ID: YDTHBT1000
FCC Statement:
This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiver antenna.
• Increase the separation between the equipment and receiver.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause undesired operation.
Notice: Modifications to this product will avoid the user's authority to operate this equipment.
DECLARATION
TELECOMMUNICATIONS TERMINAL EQUIPMENT (R&TTE) DIRECTIVE 1999/5EC.
Sarl Imodel
3 rue Labouche
31100 Toulouse
France
Declares that he following product :
Equipment class: 1
Complies with the essential requirements and other relevant provisions of the
FTEG (Article 3 of the R&TTE directive)
Protection of health and safety of the user and any other person,
(article 3.1a of the Directive)
Standards applied:
The essential requirements of the Electromagnetic Compatibility Directive
(article 3.1b)
Standards applied:
interference (article 3.2).
Standards applied:
Manufacturer Address:
Sarl Imodel
3 rue Labouche
31100 Toulouse
France
Date of issue: September 27, 2012
the reproduction even partial of this manual is forbidden - No contractual illustrations -
Specifications are subject to change without notice - No liability for printing errors and mistakes.
TRANSMITTER
OF
CONFORMITY
KONECT KT3S+ NEO Transmitter & Receiver
Item Number: KN-KT3S-PLUS-NEO/SET
EN 62311:2008
EN 301 489-1 V1.9.2 (2011-09)
EN 301 489-3 V1.4.1 (2002-08)
EN 300 440-1 V1.6.1 (2010-08)
EN 300 440-1 V1.4.1 (2010-08)
IN
ACCORDANCE
WITH
THE
RADIO
This product must not be disposed
of with other waste. Instead, it is
the user's responsibility to dispose
of their waste equipment by
handing it over to a designated
collection point for the recycling
of waste electrical and electronic
equipment.
The
collection and recycling of your
waste equipment at the time of
disposal will help to conserve
natural ressources and ensure
that it is recycled in a manner that
protects human health and the
environment.
Help
us
to
protect
environment and respect our
ressources !
i.A.
ENG
&
separate
the
5
Publicité
Table des Matières
