Grounding Instructions; Extension Cords - WAGNER 905 Power Steamer Guide D'utilisation

Read all safety information before operating the equipment
Hazard: Hot steam and parts. May cause injury,
including skin burns or property
damage. Temperatures exceed 212° F
(100ºC).
Prevention:
• Stay clear of steam, hose, hose fittings and steam plate
surface. DO NOT place hand in front of steam plate.
• Water drops are hot and may burn skin. Use extreme
caution when using steam plate overhead, and routinely
empty water from steam plate. Wear eye protection and
gloves when using this steamer.
• Allow parts to cool before changing accessories and /or
opening fill cap.
• Never point steam plate or accessories at anyone.
• Hot water may eject from accessories and when trigger is
activated.
• DO NOT over fill water container.
• DO NOT strain or kink hose. Never repair a damaged
hose.
Hazard: Fire. May cause severe injury and/or
property damage.
Prevention:
• DO NOT allow water to boil dry. Boiling dry may cause
overheating and fire.
• DO NOT allow water or steam to enter light switches or
sockets.
Hazard: Electrical Shock. May cause severe
injury.
Prevention:
• Power cord must be connected to grounded (3 prong)
outlet.
• DO NOT use the unit if the power cord is worn or damaged.
Never repair a power cord.
• DO NOT pull water container by power cord.
• DO NOT allow water or steam to enter light switches or
sockets.
Hazard: General. May cause injury and/or property
damage.
Prevention:
• DO NOT stand or sit on water container. (Use a step
ladder.)
• DO NOT modify parts or components. Never repair
damaged or worn parts.
• Water container must rest on a sturdy, level surface and in
upright position.
• Keep power steamer away from children.
• NEVER leave power steamer unattended.
English
WARNING
• Read all instructions and warnings before each use.

Grounding Instructions

This product should be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This product is
equipped with a cord having a grounding wire with an
appropriate grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER — Improper installation of the grounding plug can
result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, have
your nearest Wagner Authorized Service Center replace it.
Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to
whether the product is properly grounded. Do not modify the
plug provided; if it will not fit the outlet, have the proper outlet
installed by a qualified electrician.

Extension Cords

Use only a 3-wire extension cord that has a 3-blade grounding
plug, and a 3-slot receptacle that will accept the plug on the
product. Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy enough
to carry the current your product will draw. An undersized cord
will cause a drop in line voltage resulting in loss of power and
overheating. For lengths up to 100 feet, use 14 AWG extension
cords.
(A)
Thermal Safety Fuse Reset
Always fill the unit before plugging it in. If the steamer is
plugged in before it is filled with water, or if the steamer is
allowed to run dry, a thermal safety fuse will open, causing the
unit to turn off. If this happens, unplug the unit and allow it to
cool for at least 10 minutes. The safety fuse will reset itself.
The water container, heating element and hose are not
serviceable. Should a problem occur with the steamer,
contact Wagner Technical Service.
2
(B)
(C)