NORAUTO 2168677 Manuel D'utilisation page 50

Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure
to follow the safety rules and other basic safety precautions may result in serious personal injury.
OWNER / USER RESPONSIBILITY
DO NOT OPERATE OR REPAIR THIS PRODUCT WITHOUT READING THIS MANUAL.
Read and follow the safety instructions. Keep Instructions readily available for operators. Make certain all
operators are properly trained and understand how to safely and correctly operate the product. By proceeding
you agree that you fully understand and comprehend the full contents of this manual. Failure to operate this
product as intended may cause injury or death. The manufacturer is not responsible for any damages or injury
caused by improper use or neglect. Allow product operation only with all parts in place and operating safely.
Use only genuine replacement parts. Service and maintain the product only with authorized or approved
replacement parts; negligence will make the product unsafe for use and will void the warranty. Carefully
inspect the product on a regular basis and perform all maintenance as required. Store these instructions
in a protected dry location. Keep all decals on the product clean and visible. Do not modify and/or use for
any application other than that for which this product was designed. If you have any questions relative to a
particular application, DO NOT use the product until you have first contacted the distributor or manufacturer to
determine if it can or should be performed on the product.
INTENDED USE
This engine stand is used to mount an automotive type of engine when removed from a vehicle. This device
is designed to provide access to the engine for servicing and/or rebuilding. The stand incorporates a locking,
rotating mounting plate so that the user can turn the engine for ease of access. The stand also incorporates
wheels and casters to allow mobility across a smooth, flat surface.
DO NOT USE FOR ANY PURPOSE OTHER THAN THOSE USES OUTLINED ABOVE!
DO NOT EXCEED RATED CAPACITY OF ENGINE STAND!
TECHNICAL SPECIFICATIONS
ART:
Capacity
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may
result in serious injury.
CAUTION: Do not allow persons to operate or assemble this equipment until they have read this
manual and have developed a thorough understanding of how the equipment works.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur. Itmustbeunderstoodbytheo
peratorthat common sense and caution are factors that cannot be built into this product, but must be
suppliedbytheoperator.
USE AND CARE
• Do not modify the equipment in any way. Unauthorized modification may impair the function and/or safety
and could affect the life of the equipment. There are specific applications for which the equipment was
designed.
• Always check of damaged or worn out parts before using the equipment. Broken parts will affect the
equipment operation. Replace or repair damaged or worn parts, or missing parts immediately.
• Store idle. When equipment is not in use, store it in a secure place out of the reach of children. Inspect it
for good working condition prior to storage and before re-use.
Description
2168677
450 kg
GENERAL SAFETY RULES
IMPORTANT SAFETY CONSIDERATIONS
50