Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
user's instructions
6. Repeat steps 4 and 5 until you have weighed all ingredients.
After you have removed everything from the weighing plateau, it will display a negative value. Press
the Zero-button to reset the display. The appliance is now ready for use again.
operAtion - Warningsigns
Lo:
Appears on the display when the batterie is low. You need to replace the batterie as soon as
possible.
Err:
Appears on the display when the scale is overloaded. Remove a small amout to prevent damage.
operAtion - placing the battery
If you want to replace the battery, please follow the
following instructions:
1. Open the battery compartment at the bottom of the
appliance by removing the screw with a screwdriver
and pulling back the cap (see figure 3).
2. Remove the battery and insert the new battery (CR
2032).
3. Close the battery compartment again and tighten
the screw.
cleAninG And MAintenAnce
•
This kitchen scale is a precision instrument. Please avoid heavy striking. Do not keep it laden with
weights for a long period.
•
Wipe the base unit with a clean damp of cloth. Dry thoroughly afterwards.
•
Don't use harsh or abrasive cleaning agents or solvents.
the enVironMent
•
Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
•
When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user's instructions or the packaging.
•
The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
•
Contact your municipality for the address of the appropriate collection point in your neighbourhood.
GuArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out
during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
17
3
Publicité
Table des Matières
