Technical Specifications - LENCO EPB-410 Mode D'emploi

Troubleshooting
The power light is not ON.
The earphone cannot connect with
an Bluetooth device.
There is no sound from the
earphone.

TECHNICAL SPECIFICATIONS

Charging voltage：5V
Battery capacity ：50mAh
Charging time earphone: Less than 1,2 hour
Charging time charging base: Less than 2 hour
Playing time：Up to 5 hours
Charging station
1. Dual USB Port
2. Input: 5V~1A
3. Output: 5V~1A
4. Charging case battery capacity: 400mAh
Please check that the earphone is charged.
Long press to power off, press 1.5 seconds to
restart the earphone.
Please adjust the volume of your phone.
8