LENCO EPB-410 Mode D'emploi page 7

2. Pairing: When both earphones are removed from the case, they automatically make the
connection between the two. The left side will flash red and blue and the right side will
flash blue every 5 seconds.
3. Connect with Phone: Open phone "setting --- Bluetooth --- click "EPB-410", After the
earphone is connected, indicator will turned into a blue light every 5 seconds and you
will hear "connected".
4. Music play/pause: Press the earphone button once to pause or play the music.
5. Next track: Press the left earphone button twice to go to the next track.
Last track: Press the right earphone button twice to go to the last track.
6. Answer Call: Press the earphone button once to answer the phone call.
7. Hang up Call: Press the earphone button once to end the conservation.
8. Reject phone call:
9. Cancel Calling: Short press the earphone button when in the dialing state.
10. Siri/Google Assistant: Long press the right or left earphone for 1.5 seconds and you will
hear the prompt "DU" to activate Siri/Google Assistant.
11. Low Battery Alarm: If the earphone has less than 20% of the battery life, the light will
flash red for 5 seconds and you will hear a "DIDA" sound per 60 seconds.
12. Empty battery: When the battery of the earphone is empty, the earphone
automatically shuts down, the red light flashing and you hear "turn off".
13. Automatic Connection:
of them within the range of the connection, the earphone automatically connects to the
phone.
14. Power Off: Put into the case, it will power off.
•
Factory settings: Press the headset button for 10 seconds to reset the setting to the
factory setting. When power on the earbuds after factory reset, they automatically
make the connection between the two. Then you can connect to a Bluetooth device.
•
This product has a Bluetooth reception function, you can not transmit any Bluetooth
sound with it : it means that you can receive wirelessly a Bluetooth sound signal from
an external source like a smartphone.
Quick press the button two times to reject phone call
When the earphone and connected phone are power on and both
7