Installation; Choosing A Location; Mounting - BASETech 1837836 Mode D'emploi

10. Installation

a) Choosing a location
The viewing angle will be affected by the position of the
device when mounted.
Make sure there is a suitable power outlet nearby and
the USB power cable is long enough to connect to it.
Check that the device is within range of the Wi-Fi
access point. Use of other 2.4 GHz products, such
as other wireless networks, Bluetooth systems or
microwave ovens may cause interference.
b) Mounting
Mount the device using the supplied screws and dowels
(if needed), or place it on top of a smooth flat horizontal surface
such as a desk or countertop.
The device can be placed on a desk or mounted to the
wall or ceiling. If mounted upside down, you will need
to flip the image using the V12 app "Image Settings".
To prevent damage, adjust the camera when holding it
close to the pivot arm.
32