while using the Obd connector to power the on-board diagnostic com-
puter. doing so will drain the Memory Saver's internal battery and reduce
available run time.
Appliance Type
Cell Phone
Fluorescent light
Radios, Fan
depth Finder
Camcorder, vCR
Electrical Tool
Electrical Cooler
Car vacuum, Air
Compressor
NOTE: Estimated run-times. Actual time may vary. Times are based on the
internal battery being fully charged
5.
MAINTENANCE INSTRUCTIONS
5.1
After each use, disconnect the Memory Saver and take a dry cloth and
wipe all dirt or oil from the connector, cable and case.
5.2
Servicing does not require opening unit. There are no user-serviceable
parts.
6.
STORAGE INSTRUCTIONS
6.1
Store inside in a cool, dry place. All batteries are affected by temperature.
The ideal storage temperature is between 40 and 70 degrees Fahren-
heit. The internal battery will gradually self-discharge (lose power) over
time and more quickly in warm environments. leaving the battery in a
discharged state may result in permanent battery damage. To ensure sat-
isfactory performance and avoid permanent damage, charge the internal
battery every month.
do not power a 12v dC device with the Memory Saver
Estimated Wattage
4 watts
4 watts
9 watts
9 watts
15 watts
24 watts
48 watts
80 watts
6
•
Estimated Usage Time
•
21 hours
21 hours
8.4 hours
8.4 hours
5.6 hours
3.5 hours
1.8 hours
1.1 hours