Fantech GDC124CSS Guide D'utilisation page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How a Dehumidifier Works
The dehumidifier removes moisture from the air by passing the
moist air over a cold dehumidifying coil. The moisture con-
COMMENT FONCTIONNE UN DÉSHUMIDIFICATEUR
denses out of the air on this coil and then drains from the coil
into a bucket.
Le déshumidificateur élimine l'humidité de l'air en faisant circuler l'air humide sur
How a Dehumidifier Works
A dehumidifier reduces the relative humidity of the surrounding
un serpentin froid asséchant. L'humidité se condense sur le serpentin et s'égoutte
air two ways. The removal of moisture from the air (as just
The dehumidifier removes moisture from the air by passing the
ensuite du serpentin dans un réservoir.
described) reduces its humidity. The relative humidity of the air
moist air over a cold dehumidifying coil. The moisture con-
Le déshumidificateur réduit l'humidité relative de l'air ambiant de deux manières.
is further reduced by heating as the dry air is discharged over
denses out of the air on this coil and then drains from the coil
L'élimination de la vapeur dans l'air (comme nous venons de la décrire) réduit son
the condenser and out the front. The air is actually heated
into a bucket.
humidité. L'humidité relative atmosphérique est également réduite en chauffant
several degrees in this process. It is normal for the sur-
A dehumidifier reduces the relative humidity of the surrounding
l'air chaud rejeté du condenseur vers l'avant de l'appareil. En fait, l'air est chauffé
rounding air to slightly increase in temperature as the
de plusieurs degrés au cours de ce processus. Il est normal que la température de
air two ways. The removal of moisture from the air (as just
l'air ambiant augmente légèrement lorsque le déshumidificateur fonctionne.
dehumidifier operates.
described) reduces its humidity. The relative humidity of the air
is further reduced by heating as the dry air is discharged over
the condenser and out the front. The air is actually heated
several degrees in this process. It is normal for the sur-
Évaporateur
Evaporator
rounding air to slightly increase in temperature as the
dehumidifier operates.
Entrée de l'air
Évaporateur
Humid Air In
humide
Raccord permanent
Continuous Drain
Connector
du drain
Evaporator
Flotteur
Float
Condensate Pump
Réservoir
Humid Air In
Before Calling for Service
Continuous Drain
Connector
ASSEMBLAGE
perform these simple checks
Float
Condition - Unit is not working
Outils
Condensate Pump
• Is the dehumidifier connected to a live and correct voltage
electrical supply?
Before Calling for Service
• Is there a blown fuse or tripped circuit breaker? (Check the
perform these simple checks
outlet with another appliance).
• Is the Power Switch pushed to the "I" position?
Condition - Unit is not working
• Is the water container (if used) full and requires emptying?
• Is the dehumidifier connected to a live and correct voltage
• Is the water level plastic float freely hanging inside bucket (if
electrical supply?
Couteau
bucket is used), or hangs freely in air (if no bucket)?
• Is there a blown fuse or tripped circuit breaker? (Check the
Pièces
outlet with another appliance).
Condition - Moisture Removal Seems Insufficient
• Is the Power Switch pushed to the "I" position?
• Are the dehumidifier's vents and air filter clear of obstructions
• Is the water container (if used) full and requires emptying?
and dirt?
• Is the water level plastic float freely hanging inside bucket (if
• Does the location selected present sufficient airflow around
bucket is used), or hangs freely in air (if no bucket)?
the unit?
Condition - Moisture Removal Seems Insufficient
ASSEMBLY
• Are the dehumidifier's vents and air filter clear of obstructions
and dirt?
Unite de base (1)
Tools Required
• Does the location selected present sufficient airflow around
the unit?
Consignes de désemballage
Recyclez tous les cartons et tous les sacs en plastique.
ASSEMBLY
Gardez les sacs en plastique hors de la portée des enfants.
Tools Required
Knife
Parts
Knife
Phillips Screwdriver PH-3
Parts
Basic Unit (1)
8
Condenseur
Condenser
Air Circulating Fan
Condenser
Air Circulating Fan
Dry Air Out
Compressor
Tournevis cruciforme (taille PH3)
Tubes Longs (2)
Phillips Screwdriver PH-3
Slot Screwdriver
Long Tube (2)
Bent Handle (2)
Poignées Courbées (2)
Ventilateur
Sortie de l'air
Dry Air Out
sec
Compressor
Compresseur
Axe de la poignée (1)
Unpacking Instructions
Recycle all cardboard and plastic bags. Keep plastic bags
out of the reach of children.
1
Tournevis plat
Unpacking Instructions
Recycle all cardboard and plastic bags. Keep plastic bags
out of the reach of children.
1
1
Short Tube (2)
Position up and open top.
3
Mettez debout et ouvrez le haut.
Slot Screwdriver
Position up and open top.
3
3
Cut two vertical corners.
Short Tube (2)
CAUTION: Do not damage unit
Coupez deux angles verticaux.
with knife.
MISE EN GARDE: Ne détériorez pas
3
l'appareil avec le couteau.
Cut two vertical corners.
Bent Handle (2)
Wheel (2)
Wheel (2)
Roues (2)
Hand Axle (1)
Hand Axle (1)
Lynch Pin (2)
Lynch Pin (2)
Tiges des roues (2)
2
2
Enlevez les emballages en car-
ton et les pièces des poignées.
Remove
4
components.
4
Enlevez l'appareil.
Remove the unit.
Wheel Axle (1)
Wheel Axle (1)
Axe des roues (1)
Screw - Handle (6)
Screw - Handle (6)
Vis des poignées (6)
Washer (2)
Washer (2)
Rondelles (2)
2
Remove
inserts
and
components.
4
inserts
and
handle
Remove the unit.
handle

Publicité

Table des Matières
loading

Produits Connexes pour Fantech GDC124CSS

Ce manuel est également adapté pour:

Gdc124csGdc80cs

Table des Matières