Oki B32APH Instructions D'utilisation page 130

6.4.4-Program Table
Press the MENU button. Move to the
PROGRAM TABLE tab by pressing the
Down movement button in Main Menu
and confirm your selection with the OK
button. Program Table menu will be
displayed.
PROGRAM TABLE
00
CHANNEL 01
CHANNEL 02
03
04
SKIP
MOVE
SELECT
6.4.4.1-Switching the locations of the
stored channels
Select the program you would
like to relocate by pressing
the Up/Down or Left/Right
movement buttons. "Press the
"GREEN" button. Green will blink.
Move to the other program you
would like to relocate by pressing
the up/down or right/left
movement buttons. "Finish the
relocation process by pressing
the "GREEN" button. The channel
in the first program number you
selected has been moved to
your second selected program number
and the channels between both program
numbers have been shifted to the initially
selected program number. After setting is
complete, press the EXIT button to exit
the menu.
6.4.4.2-Deleting a stored channel
Select the program you would like to
delete by pressing the up/down
or right/left movement buttons.
"Press the "BLUE" button. The
blue button on the menu will blink
for approval. "You may perform
the deletion process by pressing
the "BLUE" button or you may abort the
deletion process by pressing the MENU
button. "Once you pres the "BLUE"
button, the selected program is deleted
05 10
06 11
07 12
08 13
14
09
NAME
DELETE
BACK
MENU
and the following channels are transferred
to after this program number. After setting
is complete, press the EXIT button to exit
the menu.
6.4.4.3-Skipping a stored channel
In the event that you do not wish to see
certain programs while navigating
through the channels using the
PR+/PR- buttons, then you
can use this function. Select the
program that will be hidden by pressing
the up/down or right/left movement
buttons. "Press the "RED" button. The
name of the program to be skipped shall
appear in red. You may perform this
procedure for more than one program. To
view the skipped program, directly enter
the program number using the numeric
buttons. To cancel the program skipping
process, press again the "RED" button.
After setting is complete, press the EXIT
button to exit the menu.
6.4.4.4-To name the channels
You can assign your program or programs
of choice the names that have
a maximum of five characters.
Select the program you would
like to name from the Program
Table by pressing the up/down
or right/left movement buttons.
"Press the "YELLOW" button. An empty
space appears beside the channel for
which you would like to specify name
information. Here, choose the desired
letter, number or sign using the up/down
movement buttons. For the second
character, press the right movement
button and then select the desired letter,
number or sign again with the up/down
movement buttons. After entering all the
characters, store the name you have
written in the memory by pressing the
"YELLOW" button. To write names for
any of the other programs, simply repeat
the above procedure. If you want to exit
the menu, simply press the EXIT button.
If the program is not named, then the
channel number of that program will be
displayed automatically.
16 I
GB