Cleaning Products With Glass Doors - Teka NFE4 900 X Manuel D'utilisation

6 Care and Cleaning
6.5. Cleaning Products
with Glass Doors
Remove the protection foil on the glass.
There is a coating on the surface of the glass.
This coating minimises stain formation and
ensures that stains and dirt are cleaned
easily. Glasses that are not protected by a coating
might be exposed to permanent bonding of organic
or inorganic, air or waterborne pollutants such as
limescale, mineral salts, unburned hydrocarbons,
metal oxides an silicons, which lead to stains and
physical damage in a short time. Despite regular
washing, the glass becomes very hard to keep
clean, though not impossible. As a result, the
clarity and good appearance of the glass reduces.
Hard and abrasive cleaning compounds and
methods increase these defects even further and
accelerate the deterioration process.
*Non-alkali, non-abrasive and water-based
cleaning products must be used for routing
cleaning procedures.
For the coating to have long service life, alkali
or abrasive substances must not be used during
cleaning processes.
These glasses were subject to a tempering
process to increase their impact and breakage
resistance.
As an additional safety measure, there is a safety
film on the back surfaces of the glasses to ensure
that they will not harm the environment in case of
breakage.
Refrigerator / User Manual
28 / 31 EN