BaBylissPro 4ARTISTS FX8700RE Mode D'emploi page 8

you are clipping.
The taper lever adjusts the
closeness of the cut from a close
cut with the taper lever in the up
position, to a longer length cut
with the taper lever in the down
position. To increase cutting
length, slowly push the lever
down. To cut closer, push the lever
up. As different cutting edges are
used in each setting, using the
taper lever lengthens the life of
the clipper blades.
Too much hair can slow down
hair clippers. Keep the clipper on
for removing hair. Then push the
taper lever back and forth quickly
for several times. If you do this
every time, especially after much
hair cutting, the clipper blades
should remain free of cut hair.
Oil the blades after the above
procedures.
Close Cut
Longer Cut
CONTAINS LITHIUM ION
BATTERY. MUST BE COLLECTED,
RECYCLED OR DISPOSED OF
PROPERLY. DO NOT DISPOSE OF
IN THE MUNICIPAL WASTE.
8