MF Aquila Raptor 4-132844A Manuel D'utilisation page 47

2. Remove valve stem core if not already done (Fig. 29a).
3. Connect the air hose Doyfe inflator chuck to the valve stem (Fig. 29b)
4. Pull up on the tyre lightly to reduce the gap between upper bead and the rim (Fig. 29c).
5. Step down the air inflation pedal
accessory to release a high-pressure air blast through the four jets to assist in seating
the beads of the tyre (Fig. 29d).
To increase the effectiveness of the inflation jets, always liberally lubricate beads
and raise the lower bead while activating inflation jets.
To improvethe operation of the tubeless tyre inflation system the compressed air
line pressure must be between 8/10 bar.
Step down on the pedal to inflate tire and seal beads with inflation hose. Frequently
stop to check bead seating pressure gauge.
AQUILA RAPTOR User Manual
29a
and contemporary press the 2 bottons on the
29c
NOTICE
NOTICE
29b
29d
47