Cleaning And Maintenance - Teesa TSA5004 Manuel D'utilisation

Owner's manual
1. Make sure that both switches are in OFF position!
2. Insert the plug of the power cord into the socket of the unit OR insert the plug of the
cigarette lighter into the cigarette lighter in a car.
3. Cooling: set the function switch to COLD position and the power mode switch to either
ECO or MAX. The green indicator will be on indicating the unit is in cooling mode.
4. Heating: set the function switch to HOT position and the power mode switch to either
ECO or MAX. The red indicator will be on indicating the unit is in heating mode.
Note:
• ECO mode – lower energy consumption;
• MAX mode – maximum performance;
• ECO mode is available only when the device supplied from AC power mains.
• Turn off and unplug the appliance from the power supply before cleaning!
• Before first use clean the parts that come in contact with food.
• Never immerse the device in water or put it under running water. Wipe its housing and
interior with a soft, slightly damp cloth.
• Do not use any aggressive detergents to clean this appliance.
• It is recommended to clean the device after each use. Do not leave the refrigerator switched
off with food inside or lid closed.
• Allow the interior of the device to dry thoroughly before closing the lid.
Main features
• Cooling function
• Heating function
• ECO function (lower energy consumption)
• Portable handle
• Cords storage
• Operation indicator
Technical data
• Capacity: 24 l
• Cooling type: peltier system, freon-free
• Energy consumption:
• DC power: cooling 48 W, heating 40 W
• AC power: cooling 52 W, heating 48 W
• AC power (ECO mode): 8 W
• Annual energy consumption: 52 kWh
OPERATION

CLEANING AND MAINTENANCE

SPECIFICATION
15
EN