Spare Parts And Accessories; Disposal Information; Warning; Declaration Of Conformity - WOLFF Power X 1000 Traduction Du Mode D'emploi Original

Gear
NOTE
Do not loosen the screws on the gear head
during the warranty period. Failure to comply
with this requirement will invalidate any
claims under the manufacturer's warranty.
Repairs
Repairs may be carried out by an authorized
customer service centre only

Spare parts and accessories

Mixer paddles for different applications and
other accessories can be gleaned from
the manufacturer's catalogues.
Exploded drawings and sparepart lists can
be found on our homepage:
www:wolff-tools.com

Disposal information

WARNING!

Render disused power tools unusable by
removing the power cord.
EU countries only.
Do not dispose of electric power tools
in the household waste
Tel. +49 (0)7062 91556 - 0 | Fax +49 (0)7062 91556 - 41 | E-Mail info@wolff-tools.de |
.
!
WOLFF | Eine Marke der Uzin Utz AG | 74360 Ilsfeld | Ungerhalde 1
Internet www.wolff-tools.de
17
In accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and its incorporation
into national law, used power tools must be
collected separately and recycled in an
environmentally friendly manner.
NOTE!
Please ask your dealer about disposal
options.

-Declaration of Conformity

We declare on our sole responsibility that the
product described in "Technical specifications"
conforms to the following standards or normative
documents:
EN 60745 according to the provisions of
Directives 2014/30/EU, 2006/42/EC,
2011/65/EU.
Dipl.-Ing. (FH) Dieter Hammel
02.01.2017, i.V.
Authorised to issue this declaration and for
the gathering of the technical documentation.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1

Exemption from liability

The manufacturer and his representative are
not liable for any damage and lost profits due to
interruption in business caused by the product
or by an unusable product. The manufacturer
and his representative are not liable for any
damage which was caused by improper use of
the power tool or by use of the power tool with
products from other manufacturers.