Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Auto Power Off function
The headphones will automatically turn off after 5 minutes of not being connected to a device with
the power turned on.
Reset function
If the headphones do not work or other malfunctions occur,
refer to "How to Charge" and connect USB cable to charge.
The headphones' working condition may be improved by
disconnecting and then reconnecting the USB cable. If it is
not improved, please contact our service center.
Troubleshooting
Power is not supplied
Charge the headphones.
Unable to pair
Pairing is available on version 2.1+EDR or later of the communication system of the Bluetooth
device.
Bring the headphones and the Bluetooth device closer together – within the range of 1 meter.
Set pro les for the Bluetooth device. For procedures on how to set, refer to the operation
manual for the Bluetooth device.
No sound comes out / a faint sound
Turn on the power of the headphones and the Bluetooth device.
Turn up the volume of the headphones and the Bluetooth device.
For the HFP/HSP connection, switch to the A2DP connection.
Switch the output of the Bluetooth device to the Bluetooth connection.
Other functions
Battery
jack
Micro USB terminal
English
13
Publicité
Table des Matières
