Dismantling, Transport And Storage; Disposal; Troubleshooting - Heidolph ROTACOOL Mode D'emploi

or vacuum cleaner. Never use pointed or sharp-edged tools for this purpose, however, make
sure the fins of the liquefier are not damaged or deformed as this will impair air flow.
Use a damp cloth (mild soap solution) to wipe clean the housing and surfaces of the
appliance.
IMPORTANT: Never use chlorine bleach or chlorine-based detergents, scouring agents,
ammonia, cleaning wool or cleaning agents with metallic components to clean the appliance,
as these will damage the surfaces of the appliance.
The appliance is maintenance-free. Any repairs which may be necessary must be carried out
by an authorized Heidolph technician. Please contact your local HEIDOLPH dealer or
representative to this end.

DISMANTLING, TRANSPORT AND STORAGE

Dismantling
Switch off the appliance and disconnect from the mains. Remove the rotary evaporator and
vacuum pump.
Drain off all the cooling liquid still in the appliance (see ASSEMBLY).
Transport and storage
Pack the appliance and parts in the original packing and make sure they are packed upright,
as indicated by the arrows on the packing. If the original packing is no longer available, make
sure adequate alternative is found and that the appliance is transported upright (mark the
packing with arrows).
The ROTACOOL may not be tipped or laid on its side during transport.
Please make sure that any old appliances or defective parts are disposed of only by
specialist builders of refrigeration plant (environmental disposal of the refrigerant). Please
also dispose of the packing materials in an environment-friendly manner (sorting).
Have any work required on the electrical, electronic and refrigerating
components performed only by suitably qualified professionals.
If the appliance does not function (the temperature display does not light up):
•
Check the mains cable
•
Check the ON/OFF switch

DISPOSAL

TROUBLESHOOTING

17
iEi