Chauvin Arnoux B102 Mode D'emploi page 16

The main components are as follows (Figure 1):
♣
Jaws: gap: 112mm (1). Capacity with jaws open: 250 mm.
♣
Clamping capacity: cable with a maximum diameter of 115 mm (2).
♣
Current direction: arrow (3), visible on the side of the clamp, indicating the current's direction.
The current is deemed to be circulating in the positive direction when it flows from the current's
generator to the current's consumer.
♣
Sizes: 2.
- ´ Measurement current: 4 A: output 1 mV/mA.
- ´ Measurement current: 400 A: output 1 mV/A.
♣
Output: voltage output, via a 1.5m-long cable moulded into the clamp and terminating in two 90
elbow male safety plugs.
16