Westfalia 313333600001 Notice De Montage page 2

11 - 98
PREPARATION
* Remove the mounting screws from the running board (point X).
ASSEMBLY
* Lay out all X and Y screws with the running board's attachment points.
* Lay out the hitch mechanism's arms with the X and Y
attachment points (insert between the running board
and the supplied A and B cross strut arms).
* Without tightening, attach the arms with the running board.
* Mount the hitch mechanism ensemble to points V and W
with the aid of the V and W screw blocks.
FINISHING
* Tighten, in the following order : X – Y – V – W,
all screws to the pairs indicated below.
FASTENING KIT
2 HM12x30 screws cl8.8
V
2 DEC12 washers
2 HM12x40 screws cl8.8
W
2 DEC12 washers
2 HM12 nuts cl8.8
6 HM12x120 screws cl8.8
6 DEC12 washers cl8.8
6 12,5/32 flat washers
X
6 HM12 nuts cl8.8
6 spacers 12,5/30
Lg.16 (A)
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
2 HM12x120 screws cl8.8
2 DEC12 washers
2 12,5/32 flat washers
Y
2 HM12 nuts cl8.8
2 spacers 12,5/30
Lg.22 (B)
2 HM16x45 screws cl8.8
Z
2 DEC16 washers
2 HM16 nuts cl8.8
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
Type Approval number
SI 031
Towbar for e24*94/20*01*0057
VW Crafter 06>16
MB Sprinter W906
MB Sprinter W907
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM08\ND81198-H - FOLIO NDMANG
313333600001
Total Total
Authori. weight Towable weight
3 500 kg 3 500 kg
Max. Verti- D
cal load Value
150 kg 17,17 kN