Safety Instructions; Customer Care - esotec Water Drops Professional Mode D'emploi

Operating manual
1. Introduction

2. Safety instructions

3. Spare parts
4. Function and intended use
5. Scope of delivery
6. Installation and commissioning
7. Watering volumes
8. Care and maintenance
9. Faults
1. Introduction
Dear customer,
thank you for purchasing this product.
The product you have purchased iwas built according to the current state of
technology. This product meets the requirements of the national and European
regulations in force. Declarations and documents are in possession of the ma-
nufacturer.
In order to maintain the product's condition and to ensure a safe operation, you as user must
attentively follow this operating manual.
This operating manual belongs exclusively to these products. It contains important instructions
for the initial installation and handling of the products.
Please pay close attention to these instructions, even if you pass on these products to third par-
ties.
You should archive this operating manual for future reference.
2. Safety Instructions
Damage caused by not following the operating instructions will void
!
the warranty claim.
We assume no liability for consequential damages.
The manufacturer assumes no liability in case of damage to the
product or personal injury caused by improper handling or not
following of the safety instructions.
In such cases, all warranty claims are void.
- For safety and approval reasons, unauthorized conversion and/or modification of the product
is not permitted.
- Therefore, please follow attentively the instructions in this manual.
- This product is intended for private use only.

Customer care:

If you have any problems or questions about this product, just contact us!
esotec GmbH, Industriegebiet Weberschlag 9, D-92729 Weiherhammer
Internet: www.esotec.de
Via phone: +49 9605-92206-0
By e-mail for spare parts orders : ersatzteil@esotec.de
By e-mail for questions about the product: technik@esotec.de
Manufacturer Part Number: 101115
8
GB