WINK Relay Guide De L'utilisateur page 5

CAUTIONS & REQUIREMENTS
• Relay should be installed by a qualified electrician.
• It must be installed and/or used in accordance with
appropriate electrical codes and regulations.
• Only use this device with copper or copper-clad wires.
• Relay can ONLY be installed in a light load gang box
(a gang box that controls lights only).
• Relay can only be used in a single or double gang box.
Do not install in a multi-gang box unit.
• Relay can only be used in a single or double gang box
where a neutral wire is present.
• Relay replaces single or double light switches not wired
to an AC outlet.
• The included wire stripper has an exposed blade which
could potentially cause injury. Use with caution.
• Use this device only for its intended purpose as described
in this user guide.
• This device must be properly installed in accordance
with the installation instructions before it is used.
5