Scope Of Delivery; Product Overview; Inserting Batteries - Blaupunkt Comfort 112 Noise Cancelling Mode D'emploi

Scope of delivery

The scope of delivery includes:
1 Comfort 112 Noise Cancelling Headphones
1 transport case
1 headphones audio cable
1 audio adapter (6.3-mm stereo jack plug)
1 airplane adapter (2 x 3.5-mm jack plug)
2 alkaline batteries, size AAA with 1.5 V
1 operating instructions

Product overview

1
Adjustable headphone band
2
Rotating earpieces
3
Power-on indicator
Illuminates with switched-on noise cancellation
4
ON/OFF slide switch
Switching noise cancellation on/off
5
ANC LEVEL control
Adjusting noise cancellation eff ect to the noise environment
6
Connector for audio cable
7
Ear cushion (left)
8
Ear cushion (right)
9
Battery compartment
12

Inserting batteries

Without batteries, the headphones can be used like passive headphones. Batteries are
required for the noise cancellation function. To replace exhausted batteries, use two AAA
alkaline batteries.
u Switch off the noise cancellation before inserting the batteries.
u Push the cover of the battery compartment on the right earpiece down and fold it up
to open the battery compartment.
u Insert the batteries. Observe the polarity markings in the battery compartment when
you insert the batteries.
u Close the cover of the battery compartment and push it up until it audibly engages.
Notes:
•
Take the batteries out of the battery compartment if you do not use the head-
phones for an extended period of time.
•
The batteries must be replaced if the power-on indicator no longer illuminates.
•
The power consumption of the headphones is low. When using alkaline batteries,
the operating time is approx. 70 hours.
•
Batteries may not be deformed, short-circuited or thrown into a fi re.
•
Batteries may leak if used improperly. This creates an explosion or fi re hazard.
Remove spent batteries from the battery compartment.
13