Only connect up the kettle if the mains voltage at the plug
corresponds to the information given on the nameplate.
Ensure that the mains cable has been completely unwound
during operation.
Remove the plug from the socket after each use, before clean-
ing and during periods when the appliance is left unattended.
Do not kink or crush the mains cable.
Disconnect the mains cable when the appliance is not being
used, during cleaning or if a fault occurs.
Always remove the mains cable from the socket by grasping
the plug – do not pull the cable itself.
Do not use the kettle with an external timer or a separate re-
mote control system.
58 of 68