Select A Source - Ruark Audio R2 mk3 Guide De L'utilisateur

then press the knob to enter it. When you have entered
the complete password highlight OK and press the
knob. Selecting BKSP deletes the last character and
CANCEL returns to the previous menu.
Connecting to an encrypted WPS network
If your network has WPS (Wi-Fi Protected Setup), it will
be identified by [WPS] before the network name. You
can connect using a password or by either pressing the
WPS button on your router, or entering the WPS PIN.
For more information, please refer to your router's user
guide.
If your R2 fails to connect to the network, it will return
to the previous screen so you can enter the security
settings again. For more instructions on how to connect
to your network, see your router's instructions.
14. Complete setup wizard
When your setup is complete, press the CONTROL
KNOB to save the settings and exit the wizard.

15. Select a source

At the end of the initial setup, your R2 will display
a menu with a list of the available sources. Use the
CONTROL KNOB to choose a source and press
SELECT.
Currently saved settings are marked with an asterisk ( )
EN
DA
DE
FR
IT
ES
NL
NO
EN-11