INFOSEC UPS SYSTEM C3 MPPT Manuel De L'utilisateur page 17

solar charging current)
03 AC input voltage range
Power saving mode
04
enable/disable
05 Battery type
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 06 15 AA 59 203 33
10A (Not available
for C3+ MPPT 2000-
24 and 3000-24)
30A
50A
Available options in 4000-48 and 5000-48 models
10A
30A
50A
70A
90A
110A
Appliances (default)
UPS
Saving mode
disable (default)
Saving mode enable
AGM (default)
User-Defined
20A
40A
60A (default)
20A
40A
60A (default)
80A
100A
120A
If selected, the acceptable AC input
voltage range will be within 90-
280VAC.
If selected, the acceptable AC input
voltage range will be within 170-
280VAC.
If disabled, no matter if the connected
load is low or high the on/off status of
C3 MPPT / C3+ MPPT output will not
be affected.
If enabled, the output of C3 MPPT /
C3+ MPPT will be off when the
connected load is low or not detected.
Flooded
If "User-Defined" is selected, the
battery charging voltage and the low
DC cut-off voltage can be set up in
programs 26, 27 and 29.
17