LENCO LBT-188 Guide D'utilisation page 22

- No ground connection from cartridge, arm, or arm cable to amplifier or
ground loop.
- Turntable too close to speakers.
Distorted of inconsistent sound from one or both channels:
- Turntable is connected to wrong input of amplifier.
- Needle or cantilever damaged.
- Drive belt overstretched or dirty.
- Platter bearing without oil, dirty or damaged.
- Dust on stylus.
- MM/MC switch on pre-amplifier set incorrectly.
Remark: Due to the ErP Stage 2 requirements for power
saving measures, a unit which is connected to the mains
power will switch itself to standby mode automatically if no
music has been playing for about 20 minutes.
If your unit switches off regularly, this is no defect.
Power supply adaptor
Manufacturer: BRIGHTPOWER OPTOELECTRONIC TECHNOLOGY CO., LTD
Model number: SW1200500-FM
Use only the power supply listed in the user instructions
21