Operation; Grilling Without The Stand; Cleaning The Appliance - Unold Vario Notice D'utilisation

17. Check to make sure that all parts have been
assembled correctly.

oPeration

1. Prepare the appliance as described in the
section "Assembly and preparation for
operation" on page 16.
2. Check to make sure that all parts have been
assembled correctly, and that the grill table
is stable.
3. For safety reasons, the appliance may
be used indoors only as a table grill. The
appliance may be used as a free-standing
grill only in a protected area out of doors.
4. Connect the appliance via the power cable
to the power supply (AC, 230 V~, 50 Hz).
5. Use the rotary knob to set the desired
temperature.
6. When the required temperature has been
reached, you can start grilling.
7. The first time you use the appliance, it is
possible that there will be some smoke.
8. The water in the water tray may also produce
a small amount of steam. The water prevents
the surface under the grill from exposure to
excessive temperatures.
9. Please make sure that the water always
covers the bottom of the pan. If this is not
the case, add water. For this, switch off
the appliance and let it cool off. Make sure
that no water splashes onto the hot heating

GrillinG without the StanD

You can also use the grill without the stand. If you wish to use the grill indoors, for safety reasons you
may do so only without the stand. You may use the appliance as a free-standing grill only out of doors.
For this, prepare the appliance on a suitable flat surface as described, and fit the insert, with the
correctly installed and filled water tray, and the heating element and grill plate inserted.

cleaninG the aPPliance

1. allow the appliance to cool before cleaning it.
2. Before cleaning, always turn off the appliance
and unplug it from the power supply.
3. Do not immerse the appliance or power
cable in water or other liquids.
4. Wipe off the stand, the gridwork shelf,
the grill plate, the tray surfaces and the
plastic insert with a damp cloth and a
little dishwashing detergent. Do not use
any abrasive scouring agents, steel wool,
metal objects, disinfectants, or hot cleaning
agents, since they can cause damage.
18. Connect the appliance via the power cable
to the power supply (AC, 230 V~, 50 Hz).
elements. The grill plate has a small recess
through which you can easily top up the
water without having to remove the hot grill
plate from the appliance.
10. Do not completely cover the grill plate with
aluminium foil or other objects that could
cause the appliance to overheat. Of course,
you can use conventional aluminium grill
trays, and you can also grill food wrapped in
aluminium foil, such as potatoes.
11. Do not touch the grill plate while the appli-
ance is in use, as there is a danger of being
burned. Even when grilling is over, the plate
remains hot for a certain time.
12. Frozen foods should be completely thawed
before grilling.
13. For optimum grilling results, turn the food
regularly.
14. It is possible that grease may splatter while
food is being grilled. Therefore, you should
protect the ground beneath the appliance to
prevent damage from splattering grease.
15. When you no longer need to grill, please set
the controller to the "MIN" position, and
then unplug the appliance from the power
supply.
5. The water tray should be allowed to cool
completely before removing it for emptying.
The grill plate and the water tray can be
washed in a dishwasher if required. We
recommend cleaning by hand, as aluminium
can discolour in a dishwasher. Such
discolorations are not harmful to health, and
are not a basis for complaint.
6. The appliance must be completely dry before
you use it again.
7. When completely dry, store the grill in a dry,
safe place so that it is protected from dust,
impact, heat, and moisture.
17