Maintenance - Oceanic OCEADH12LPA Guide D'utilisation

CONTINUOUS DRAINAGE
1.Take out the water tank
For continuous drainage,
the end of the hose should not be
submerged in water to prevent it
from being blocked or damaged.

MAINTENANCE

PRECAUTIONS
Do not remove the float out
1
of the tank otherwise the
dehumidifier can not start up.
3
If the tank is dirty, wash it
with cool/warm water. Do not
use cleanser, steel balls,
chemically treated dust-proof
cloth, gasoline, benzene,
thinners or other chemical
solvents in case of damage
and leakage.
2.Use a water
hose(diameter=9.5mm) to connect
the water outlet.
3.Passes the water hose through
the cutting hole in the tank and put
the tank back in position.
Ensure the water tank is in
2
right position when putting it
back, otherwise the
dehumidifier can not start up.
When the dehumidifier is in operation,
4
make sure that the rear of the dehumidifier
maintains a minimum spacing of 20 cm.
6