Intended Use; Scope Of Delivery; Features And Functions - Abus TVAC25100 Manuel Utilisateur

1. Intended use

This transmission set "IP via Coax" or "IP via dual wire" is used for the transmission of network data via
standard coaxial cables or twisted pair cables. This allows IP data from network cameras to be
transmitted easily using existing cables – replacement with expensive network cables is therefore
completely unnecessary. You can also use this transmission set effectively at locations where a wireless
connection is not possible, or no WLAN is available.
A detailed description of all functions can be found in chapter „3 Features and functions".

2. Scope of delivery

Receiver & Transceiver units

3. Features and functions

•
Use of existing BNC or dual-wire lines for transmitting IP video signals
•
High bandwidth
•
Increased transmission distance (up to 1500 m) compared to network cables
•
Delay-free real time video transmission
•
Ideal for transmission where radio transmission is not possible
•
Reduction of the installation costs, since no cost intensive network cables must be installed
Power supply incl.
EU, AU and UK plugs
17
English
Walls mount incl. fixing
screws