Kicker Front Row ZXDSP1 Manuel D'utilisation page 2

Authorized KICKER Dealer:
Purchase Date:
Serial Number:
Congratulations on purchasing the KICKER Front Row! The heart of your Front Row DSP processor is a
combination of state-of-the-art digital signal processing and user friendly analog controls that give you easy,
fl exible, and precise control of the audio in your car. The soul of your Front Row lies in the precision-designed,
user-adjustable features that transform your car into a studio and put you right there, Front Row, with your favorite
music! You are going to love how your music sounds with heart and soul.
PERFORMANCE
Operating Voltage
Fuse
Remote Out Current Capacity
DSP Specifi cations
Signal-to-Noise Ratio
Frequency Response ± 0.2dB
A/D-D/A Converters
THD+N
Input Sensitivity
Electronic Crossovers | 32-Step
Precision with Analog Control |
Selectable Slope of 12dB, 24dB,
or 48dB per Octave
Subsonic Filter
Subwoofer Phase Control
KickEQ™
SHOCwave™
Width
Depth
Height
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER Front Row. Make sure there are no
items behind the area where the screws will be driven. Choose a location that allows at least 4" (10cm) of open
ventilation for the device. If possible, mount the Front Row in the climate-controlled passenger compartment. Drill
four holes using a 7/64" (3mm) bit and use the supplied #8 screws to mount the Front Row.
Wiring: Disconnect the vehicle's battery to avoid an electrical short. Then, connect the ground wire to the Front
Row. Make the ground wire short, 24" (60cm) or less, and connect it to a paint-and-corrosion-free, solid, metal
area of the vehicle's chassis.
2
2012 FrontRow (ZXDSP) Rev G.indd 2 2012 FrontRow (ZXDSP) Rev G.indd 2
Front Row Digital Signal Processor
Owner's Manual
DC 10–16V
2A
100mA
50MHz ZX CPU
28/56-bit double-precision DSP
110dB (ref. 4V)
10Hz–22KHz
24-Bit
0.004%
300mV-10V
FRONT: Variable HI-PASS, 10–5kHz
REAR/SURROUND: Variable HI-PASS, 10–500Hz
REAR/SURROUND: Variable LO-PASS, 50–5kHz
SUB: Variable LO-PASS, 40–160Hz
Variable, 10–80Hz @ 48dB/Octave
Variable, 0–180°
Variable, 0–15dB @ 45Hz
Variable Bass Restoration 0–12dB, 1 Octave Below Fundamental
7-1/32" (178.5mm)
7-23/32" (196mm)
1-19/23" (40.6mm)
4/30/2012 1:55:45 PM 4/30/2012 1:55:45 PM