Sound-Control; Problem Chart; Cleaning And Maintenance; Technical Specifications - Futurelight CP-240 Mode D'emploi

Del-button and press the Bank Copy-button.
Delete all scenes
Caution: When you select this function, all programmed scenes will be irrevocably lost!
Press and hold the Program-button and the Bank Down-button while disconnecting the device from the
mains. Connect the device to the mains again.

6.5 Sound-control

You can activate the sound-control by pressing the Music-button (LED flashes). Please note that programs
and records are only active in this mode when the controller receives a music-signal. If there is no music
present, the program or chaser stops.

7. PROBLEM CHART

PROBLEM
No power.
No signal output.

8. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Number of control-channels:
Integrated programs:
Chasers:
Sound-control:
Audio-input:
Audio-sensitivity:
DMX 512-output:
Dimensions (LxWxH):
Minimum mounting depth:
Weight:
Please note: Every information is subject to change without prior notice. 20.04.2006 ©
CAUSE
The power unit is not connected.
Blackout-mode activated.
230 V AC, 50 Hz ~
via 9-12 V DC, 300 mA power unit included in the delivery
5 W
240
30 with 8 scenes each
6 x 240 scenes
via built-in microphone or via audio-input
RCA
0.1 - 1 V
3-pin XLR-connector with polarity selector
483 x 134 x 90 mm
19" mounting dimensions with 3 u
170 mm
2.5 kg
22/41
REMEDY
Check the connection cable of the
power unit and any extension-cables.
Switch off blackout by pressing the
Blackout-button.
51834265_V_1_2.DOC