Storage And Maintenance; Contact Information - LAS 10343 Manuel De L'opérateur

Fixture
Place the strap carefully around the transportation load and guide the loose end of the strap through the slot (1).
The strap is tensioned by moving the ratchet handle (3) back and forth. (See Figures A, B and C)
The transportation load is secured by bring the ratchet handle(3) to the home position, Figure A.
To open the strap, the ratchet locking mechanism (2) us pulled up and the ratchet handle (3) is pushed forwards (Figure D). Now
pull the strap out of the slot (1).
5.2 TENSIONING STRAPS WITH CLAMPING LOCK
These tensioning straps may only be used to wrap or bundle objects. They are not suitable as tie-downs for a load
since they are only fitted with a clamping lock.
Wrap the strap around the objects. Make sure that the strap is not twisted. To close the strap, push the lever on the top of the lock
down and guide the loose end of the strap, from below, through the lock. Then release the lever. Tension the strap by holding
the part with the clamping lock in one hand and use the other hand to pull the loose section in the opposite direction through
the lock.
Release the tensioning strap by pushing down on the lever and holding. Pull the loose end out of the lock.
5.3 TENSIONING BELTS
The tensioning belts may not be used for load securing due to their elasticity.
Only use the tensioning belts to secure lightweight objects in the boot of your vehicle or to the luggage rack of your bicycle. Hook
the tensioning belt to a suitable part of the vehicle and secure the object under it.
Hold the tensioning belt firmly as you do so. The tensioning belt may cause injuries if it slips under tension.

6. STORAGE AND MAINTENANCE

6.1 STORAGE
• Only store the straps in dry, lightly heated spaces.
• Protect from major sunlight.
• Do not dry or store the strap in the vicinity of fire, radiators, heating pipes or other locations with extreme temperatures.
• Never store with chemicals.
6.2 MAINTENANCE
Maintenance work may only be carried out by the manufacturer or persons named by the manufacturer.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of the tensioning straps via the recycling bin or the public/municipal collection points.
The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisati-
on or other forms of reusing waste equipment!

8. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
9