Accessories - Rexel SmartCut A300 Manuel D'utilisation

Cutting mat replacement
D. Cutting mat has four cutting positions (2 each side).
When blade does not cut cleanly, either rotate or flip mat
over to new cutting surface. When mat has been worn on all
four cutting surfaces, replace it.

Accessories

Cutting Mats: 2 cutting mats, Part number: 2101986
Blades: 2 Straight blades, Part number: 2101983
1 Wave blades, Part number: 2101985
2 Perforated blades, Part number: 2101984
Refer to your local reseller for availability.
Guarantee
Operation of this machine is guaranteed for two years
from date of purchase, subject to normal use. Within the
guarantee period, Rexel will at its own discretion either
repair or replace the defective machine free of charge.
Defects due to misuse or use for inappropriate purposes are
not covered under the guarantee. Proof of date of purchase
Register this product online at www.rexeleurope.com
Cutting blade replacement
m
CAUTION: Sharp blade
E. Carefully pry open the blade cover from both sides of
1
the handle assembly.
Remove the screw and take off blade holder assembly.
2
F. Insert the replacement blade holder assembly and line
3
up with the notch at the top.
Tighten the screw.
4
Replace blade cover and make sure it snaps shut.
5
Only use the accessories that are approved by the
6
manufacturer.
Service
Do not attempt to service or repair the unit yourself. If your
trimmer is under warranty return it to the point of purchase
for replacement or repair. If your trimmer is no longer
under the point of purchase return period and requires
replacement or repair, please contact your supplier for
further assistance.
will be required. Repairs or alterations made by persons not
authorised by Rexel will invalidate the guarantee. It is our
aim to ensure that our products perform to the specifications
stated. This guarantee does not affect the legal rights
which consumers have under applicable national legislation
governing the sale of goods.
G
5