Operating The Trimmer - Rexel SmartCut A300 Manuel D'utilisation

Specifications
Models
Product code
Sheet Capacity 80g/m
2
Integrated Paper Guide
Size Guide
Cutting Length
Score
Wave Cut
Perforate
Trimmer base with calibrated grid
1
Metric and Imperial scale guide
2
Transparent paper guide
3
Rotary blade / handle assembly
4
Safety cutting rail
5
Safety cutting mat
6
Cutting mat removal groove
7

Operating the trimmer

Place the trimmer on a stable, flat surface such as a table
1
or desktop.
A. Push and hold the rotary blade/handle to the top of the
2
guard/pressure bar.
B. Place material to be trimmed at the selected position
3
using transparent paper guide and hold material securely
in place with left hand while cutting. Grid pattern and
scale can be used for alignment.
C. Press down on rotary blade/handle assembly with
4
right hand and slide blade toward you to cut.
Do not make a return trip cut with the trimmer. Always
5
begin cutting from the top.
Cutting restrictions
• Remove staples, paper clips etc. before cutting.
• Do not cut metal film, film containing glass etc.
• Do not cut more sheets than cutting capacity allows.
• Do not carry trimmer by holding on to the cutting blade
handle.
4
SmartCut™ A300
2101963
10
A4, A5 & A6
Centimetres and Inches
300mm
Not available
Purchase product 2101985
Purchase product 2101984
SmartCut™ A400
2101964
10
A4, A5, A6 & A7
Centimetres and Inches
300mm
Not available
Purchase product 2101985
Purchase product 2101984
m
NOTE: Please retain this information regarding
safe operation of this paper trimmer
m CAUTION: Trimmer should be operated by an
adult or under adult supervision
m
CAUTION: Sharp blade, do not touch the edge of
the blade
• Always operate trimmer with both hands and on a stable
base or desk.
• Check the fittings of the rotary blade and safety cutting rail
from time to time.