Description Of Symbols; Instructions Prior To Installation; Description Of Accessory - Baxi RILANCIO+ Instructions D'installation

DESCRIPTION OF SYMBOLS

WARNING
Risk of damage to or malfunction of the appliance. Pay special attention to the warnings concerning
danger to people.
DANGER - HIGH VOLTAGE
Live components - electrocution hazard.
IMPORTANT INFORMATION
Information to read with particular care as it is useful for the correct operation of the boiler.
GENERIC PROHIBITION
It is forbidden to do/use the things indicated alongside the symbol.

INSTRUCTIONS PRIOR TO INSTALLATION

• The boiler must be only installed by qualified technicians.
• Before proceeding with installation of the boiler, the system must be adequately cleaned (see the boiler instructions manual).
• Before switching on, make sure all the electrical connections have been made correctly.
• Carefully read the boiler instructions manual.
• The appliance must be installed in the special template box supplied separately.

1. DESCRIPTION OF ACCESSORY

The RILANCIO+ appliance, fitted with an open manifold, can be used to manage up to 3 heating circuits. The compact dimensions
of the frame (depth 210 mm) allow easy concealed installation or wall-mounted installation. The RILANCIO+ appliance is fitted
with a circulation pump for each circuit, controlled by an zone room thermostat. The following models of RILANCIO+ are available:
KIT MODEL
(A) - RILANCIO+ (2 ZONES)
(B) - RILANCIO+ (3 ZONES)
This appliance distributes the boiler circuit water to the zones depending on the demand of the zone room thermostats. The
zones are not mixed.
2 Heating circuits 3 Heating circuits
●
9
●
CG_2637
7222564.01 (3-09/15)