Lagostina Grind and Brew Notice D'utilisation page 14

Troubleshooting
PROBLEM
The coffee does
not brew or the
appliance does not
turn on.
The appliance
seems to leak.
Brewing takes a
long time.
The filter basket
overflows or the
coffee flows too
slowly.
The coffee tastes
bad.
The coffee does
not flow.
The time is not
correct (there is a
time difference).
14
• Make sure the appliance is plugged into a working outlet and the
screen flashes.
• The water tank is empty.
• There is a power outage.
• Unplug the machine, then plug it back in.
• The clock should be reprogrammed after a power outage.
• Make sure the water reservoir has not been filled beyond the
maximum limit.
• It may be time to descale the appliance.
• Several minerals can accumulate in the coffee maker's circuitry.
Regular descaling of the machine is recommended. This may need
to be done more often depending on the hardness of your water.
For more information, please consult the "Descaling" section.
CAUTION: do not take the appliance apart.
• Coffee maker needs cleaning.
• There is too much coffee. We recommend using one measuring
spoon or one tablespoon of ground coffee per cup.
• The ground coffee is too fine (Please note that: ground coffee for
espresso won't work in a drip coffee maker).
• There is ground coffee lodged between the paper filter and the
filter holder.
• The paper filter is not opened properly or is not well placed.
• Rinse the filter holder before inserting the paper filter so it will
adhere to the damp walls of the filter basket.
• Be sure you have not inserted a paper filter at the same time as the
permanent filter.
• Make sure the filter basket is pushed down all the way.
• Clean the coffee maker.
• The ground coffee is not right for your coffee maker.
• The proportion of coffee and water is not sufficient. Adjust to suit
your taste.
• The quality and freshness of the coffee is not the best.
• The water is of poor quality.
• See if there is water in the water tank.
• The coffee flow system may be obstructed. You may clean it simply
by rinsing with water.
• The timer is synchronized and depends on your electrical network. If
there is a time difference, we recommend that you program the time
once a week to be sure it is correct.
SOLUTION