Turning The Bluetooth Sound System On/Off; Establishing A Bluetooth Connection; Disconnecting A Bluetooth ® Connection; Reset - LENCO PA-325 Mode D'emploi

®
Turning the Bluetooth
m Set the POWER switch to ON to switch the Bluetooth
m Set the POWER switch to OFF to switch the Bluetooth
Establishing a Bluetooth
1. Switch the Bluetooth
2. Press and hold the BT button for approx. 3 seconds. A short melody will sound followed
by 2 short beeps.
3. Release the BT button.
4. Switch on your mobile device.
5. Activate the Bluetooth
6. Start the device scan on your mobile device.
7. Select Lenco PA-325 from the list and connect the devices.
Once the devices are connected with each other, a short melody will sound. The Bluetooth
indicator light lights up.
• If you switch the Bluetooth
connect with the device connected before when it is switched back on again.
If not, you need to press and hold the BT button for approx. 1 second (short
melody will sound) to have it reconnect with the Bluetooth
The Bluetooth
must be activated. Once the Bluetooth
short beeps will sound.
• If you connect a device to the AUX INPUT connection socket, it will be the
preferred connection for playback. The transmission from the Bluetooth
device will be paused. The transmission from the Bluetooth
resume until you remove the plug from the AUX INPUT connection socket.
Disconnecting a Bluetooth
There can only be one device connected to the Bluetooth
any time.
If you would like to pair another device, you must first end the existing connection by...
... switching off the Bluetooth
... keeping the Bluetooth
sound.

Reset

Electromagnetic interference around the device could lead to malfunctions. If the device
does not connect, proceed as follows:
1. Move the device away from the electromagnetic interference.
2. Switch the Bluetooth
sound system on/off
®
connection
® sound system on.
®
function on your mobile device.
®
sound system off for a while, it will automatically
®
device must be placed nearby, switched on and Bluetooth
® connection
®
function on your mobile device or
®
button BT pressed for approx. 3 seconds. A short melody will
®
sound system off (POWER switch is set to OFF).
® sound system on.
®
sound system off.
®
device.
®
device has been connected, two
® device will not
® sound system via Bluetooth
®
®
®
® at