Installation manual / Manuel d'installation
4
Apply a silicone pressure joint on the floor
inside the outline of bathtub's base.
Appliquer un joint de silicone à l'intérieur
du tracé du contour du bain.
5
Connect the bathtub drain to the floor drain.
Hook up the water to the faucet and gently
put back the bathtub at the specified area
in step 1, and wipe off the silicone excess.
Connecter le drain du bain avec le drain du
plancher; connecter l'entrée d'eau au robinet;
déposer avec précaution le bain à l'endroit
spécifié à l'étape 1, et essuyer l'excédent de
silicone.
!
Check that all connections are waterproof.
Vérifier que tous les connections sont étanches.
!
Use a leveling bar to ensure that the bathtub is leveled.
Utiliser un niveau pour vous assurer que le bain est de niveau.
4
PENCIL MARK
TRAIT DE CRAYON
SILICONE
FLOOR
PLANCHER
TOP VIEW
VUE DE DESSUS
CENTER OF DRAIN
CENTRE DU DRAIN