ISOUND BT-200 Guide De L'utilisateur page 5

NOTE: The volume up/down bu ons may control the
volume on your device. Device's results may vary.
Volume down/track back bu on
• Press and release to lower the volume.
• Press and hold to go to the beginning of the current track.
NOTE: The volume up/down bu ons may control the
volume on your device. Device's results may vary.
Charging your BT-200
NOTE: Make sure your BT-200 is fully charged before
using it the rst time.
1. Gently plug the Micro-USB end of the included charge
cable into the charge port of the control box.
2. Plug the USB A end of the cable into a powered USB
port, such as a computer, laptop, or USB AC adapter
(not included).
3. The LED power indicator located next to the volume
up/track forward bu on will light up solid red. Once the
headset is fully charged, the LED power indicator will turn
solid blue.
NOTES:
• When the ba ery level is below 10%, you will hear a
voice say "Ba ery level low". Charge your BT-200 with
the included charge cable. This feature only works while
the BT-200 is on.
• The LED power indicator will light up red while charging
even if the BT-200 is o .
• You cannot charge your BT-200 while listening to music.