Unitest Therm 100 Mode D'emploi page 16

Contents
Contents
1.0 Introduction ........................................17
2.0 Transport and Storage ........................18
3.0 Safety..................................................20
4.0 Control elements and connections ......21
5.0 Carrying out measurements ................21
5.1 Temperature Measurement ................22
5.2 Measurement point illumination..........23
6.0 Maintenance........................................23
6.1 Cleaning ..............................................23
6.2 Replacement of batteries ....................24
6.3 Calibration Interval ..............................25
7.0 Technical Data ....................................26
24 month Warranty ............................27
References marked on instrument or in instruction
manual:
Warning of a potential danger, comply with instruction
manual.
Reference. Please use utmost attention.
Caution! Dangerous voltage. Danger of electrical
shock.
Caution, hot surface.
Symbol for the marking of electrical and electronic
equipment (WEEE Directive 2002/96/EC).
Continuous double or reinforced insulation complies
with category II DIN EN 610140.
Conformity symbol, the instrument complies with the
valid directives. It complies with the EMV Directive
(89/336/EEC) are fulfilled. It also complies with the Low
Voltage Directive (73/23/EEC).
16
Page