Snooze Function; Sleep Function; Display Backlight - Sangean PR-D7 Mode D'emploi

Snooze function

1. Whilst the alarm is activated, press any buttons except the
Power button will activate the snooze function. The radio or
HWS buzzer alarm will be silenced with interval of 5 minutes.
2. The display will flash both the snooze symbol
alarm symbol. The snooze function can be repeatedly during the
one hour that the alarms are active.

Sleep function

The sleep timer will automatically switched off the radio after a
preset time has elapsed.
1. Press and continue to hold down the Power button for more than
2 seconds, followed by a beep, the display will cycle through the
available sleep timers in the order of 60-45-30-15-120-90-60.
Release the Power button when the required sleep timer
appears in the display. The
display and the radio will play the last station selected.
2. To cancel the sleep function, press the Power button.
The symbol will disappear and radio is off.

Display backlight

Press any buttons will illuminate the LCD display for approx.
15 seconds. During scanning stations and alarm activated will also
automatically illuminate the display.
13
and the
symbol will appear in the