emerio DH-126050.1 Mode D'emploi page 8

dehumidifying capacity is lower in lower relative humidity. In the same relative humidity, the dehumidifying
capacity is higher in higher temperature and the dehumidifying capacity is lower in lower temperature.
BEFORE FIRST USE
• To avoid any damage, place the appliance in an upright position for at least 24 hours before initiation.
• After removing the packaging, make sure that the appliance is in good condition.
• Do not allow children to play with the packaging materials as there is risk of suffocation.
The appliance shall be installed on a flat surface where the air inlet/outlet would not be blocked. The required
distance around the unit should be at least 30cm. To save energy, keep windows and door closed when the
appliance is running.
Note: If the dehumidifier gets interference from the household appliances, such as television and radio cassette
player, please keep the equipment away from the dehumidifier for over 70cm.
USE
Plug in the appliance. A "beep" sound will be heard. The appliance is on standby mode.
ON/off: Press the on/off button to turn on the appliance. The panel will show the current humidity. Press the
button again, the appliance will be off.
Humidity setting: press the setting button to set your desired humidity level from 30%-80%. Each press will
increase the humidity by 5% and after 80%, the figure will return to 30% for another circulation. The set humidity
will flash several times in the panel, then environmental humidity will show. Humidity setting is only vaild under
auto mode.
Fan: Press the fan button to select low or high fan speed. The corresponding indicator will be on.
MODE: Press the mode button to select the mode: Auto mode, Low dehumidifying mode, High dehumidifying
mode and Clothes drying mode.
1. Auto mode: In this mode, the auto mode indicator lights up. Both fan speed and humidity can be adjusted
under auto mode. The appliance will automatically maintain the select humidity.
2. Low dehumidifying mode: In this mode, the appliance works with low fan speed for any room humidity and
the humidity cannot be changed. The environmental humidity is shown on the panel.
3. High dehumidifying mode: In this mode, the appliance works with high fan speed for any room humidity and
the humidity cannot be changed. The environmental humidity is shown on the panel.
- 7 -