Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
Leave the iron to cool and turn the temperature control knob to minimum before
storing it.
4.
Do not store the apparatus next to hot sources, for exemple fire, radiator, or any
other heating apparatus.
Cleaning :
1.
To remove any incrustations or residue from the soleplate, use a wet soft cloth
2.
Dry the soleplate thoroughly after cleaning.
3.
Clean the iron shell with a wet cloth without detergent
4.
Caution : do not use a metal sponge or abrasive detergents
V- TROUBLESHOOTING GUIDE
Problems
The iron gives off a smell or
smoke
The iron does not warm up
The iron does not give steam
The jet function does not
work
The spray function does not
work
Water leaks from the iron
Causes
The iron gives off a smell or
smoke when it is plugged for
the first time
The iron is not plugged
The
temperature
is
properly set
The water tank is empty
The water tank is not full
enough
The temperature is not set
properly
The iron is not in the right
position
The water tank is not full
enough
The temperature is not set
properly. It is too low to
produce steam
54
Solutions
Smells
and
disappear
after
minutes
Check that the iron is
plugged
in
a
socket
not
Check that the temperature
control knob is set properly
Add water in the tank, leave
the iron to warm up and
activate the steam
The water tank must be at
least ¼ full
The temperature must be
right on steam.
Hold the iron horizontally
and start the pump
The water tank must be at
least ¼ full
The
temperature
knob must be set on steam.
Wait until the iron is hot
smoke
will
a
few
220-240V
control
Publicité
Table des Matières
