Rating Plate - Trebs Comfortbakery 99263 Mode D'emploi

must be observed for the electrical connection:

Before connecting the device, compare the connection data (voltage and frequency) on the
rating plate with those of your electrical network. This data must agree in order that no
damages occur in the device If in doubt, ask your qualified electrician.

The electrical outlet must be protected by a 16A safety cut-out switch.

The connection between the device and the electrical network may employ a 3 meter long
(max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs or gangs is
prohibited because of the danger of fire that is involved with this.

Make sure that the power cable is undamaged and has not been installed under the ice
maker or over hot or sharp surfaces.

The electrical safety of the device is only guaranteed if the device is connected to a properly
installed protective conductor system. Operations using an electrical outlet without a
protective conductor are prohibited. If in doubt, have the house installation checked over
by a qualified electrician. The manufacturer cannot be made responsible for damages that
are caused by a missing or damaged protective conductor.
4 Function
In this chapter, you'll find important information on the function of the device.
4.1 Overview:
1 Upper housing
2 Power indicator
3 Ready indicator
4 Upper plate

4.2 Rating plate

The rating plate with the connection and performance data can be founded beneath the device.
5 Bottom housing
6 Power cover
7 Bottom plate
29