Speakers Illustration - AIRPULSE A300Pro Mode D'emploi

Speakers illustration

2 3 4 5 6
7
8
9
10 -2 +2 -1
-4 +4 -2
-6 +6 -3
11
DESIGNED BY PHIL JONES
12
1
Right speaker
1.LED display window and remote receiving window
Displays the current audio source signal.
Also displays the master volume level and treble/bass level when adjusting volume and
treble/bass level in other inputs (AUX/Coaxial/Optical/USB/Bluetooth).
2.Volume dial
Rotate to adjust volume level and input sensitivity;
When the "INPUT SELECT" switches are set at "OTHERS" positions, press to switch input
signal.
When powered on, press and hold to enter standby; when in standby, press and hold to
power on.
3.Input sensitivity indicator
When the "INPUT SELECT" switches are set at "BALANCED" and "UNBALANCED"
positions, this indicator will be steady lit.
4.Volume indicator
When the "INPUT SELECT" switches are set at "OTHERS" positions, this indicator will be
steady lit.
5.Volume and input sensitivity display window
When the "INPUT SELECT" switches are set at "BALANCED" and "UNBALANCED"
positions, it will display the current input sensitivity value, ranging from -30 to +6dB.
When the "INPUT SELECT" switches are set at "OTHERS" positions, it will display the
current volume level (0-60).
6.Input selection toggle switch
Slide the "INPUT SELECT" switches to "BALANCED" positions on both speakers when
using XLR cables to respectively input signal to the left and right speakers;
Slide the "INPUT SELECT" switches to "UNBALANCED" positions on both speakers
when using RCA audio cables to respectively input signal to the left and right speakers;
Slide the "INPUT SELECT" switches to "OTHERS" positions on both speakers when in
the wireless connection mode.
2 3 4 5 6
13
7
- +
14
8
+6
+3
0
-3
9 -6
15
+3
+1 10 -2 +2 -1 +1 +1
0
-1
+2 16 -4 +4 -2 +2
-3
-6 -3 +3
+3 +6
11
DESIGNED BY PHIL JONES
12
17 17
18 18
Left speaker
7
Speakers illustration
7.Pairing button
The left and right speakers have been paired before leaving the factory. If the wireless connection
fails to resume, please follow "The left and right speakers pairing" on page 12 to press the
pairing buttons to re-pair.
8.Pairing indicator
Red indicator steady lit = the left and right speakers already paired.
Indicator flashing in a breathing pattern = the left and right speakers not connected or connection
failed.
Professional operating mode: When the "INPUT SELECT" switches are set at "BALANCED"
and "UNBALANCED" positions on both speakers, the left and right speakers can be operated
separately and the treble/bass dial can be used to adjust treble/bass level.
Note: The treble/bass dials on the rear panels of both speakers only function in the
balanced and unbalanced inputs, they do not function in the wireless connection mode.
9.Unbalanced input (RCA) port
Connect to RCA output port of audio source devices using RCA audio cable; connect the left
and right speakers respectively.
10.Balanced input (XLR) port
Connect to audio source devices with balanced output port using XLR cable; connect the left
and right speakers respectively.
11.Bass level adjustment
In the balanced or unbalanced inputs, bass level of both speakers can be adjusted respectively
within a ±6dB range.
12.Treble level adjustment
In the balanced or unbalanced inputs, treble level of both speakers can be adjusted respectively
within a ±3dB range.
Wireless connection mode of the left and right speakers: When selecting this mode, slide
the "INPUT SELECT" switches to "OTHERS" positions on both speakers. Then audio source
signal can be input from AUX, COAX, OPT or USB port; and Bluetooth devices can be
connected via Bluetooth.
All functions of the remote control are available in the wireless connection mode.
13.AUX input port
Connect to RCA output port of audio source devices using RCA audio cable.
14.Coaxial input port
Connect to audio source devices with coaxial output port using coaxial cable.
15.Optical input port
Connect to audio source devices with optical output port using fiber optic input audio cable.
16.USB B type port
Connect to audio source devices with USB output port using USB cable.
17.Power cord connector
Connect to plug of power cord.
18.Power switch
Turn on/off speaker power.
8