Specifications/Statement; Troubleshooting - AIRPULSE A300Pro Mode D'emploi

Specifications/statement
Tweeter: Horn Loaded Ribbon Tweeter
Mid-Woofer:
6.5inch Aluminum Cone Underhung Design Neodymium
Power Mid-Woofer
Amplifier System:
Digital Amplifier with Xmos Processor
Power Output: L/R (Treble):10W+10W,
L/R (Woofer): 120W+120W
Frequency Range: 40Hz-40KHz
Signal-Noise Ratio: L/R: ≥90dB(A)
Input Mode: Balanced/Unbalanced/AUX/USB/Optical/Coaxial/Bluetooth
Cabinet Size (WxHxD): 225 x 385 x 350 (mm)
Net Weight: 24 Kg (53 Pounds) / Set
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without prior notice.
21

Troubleshooting

Problem
• Check if the left and right speakers are powered on.
• Try to turn up the volume using either the master volume
control or remote control.
No sound
• Ensure the audio cables are firmly connected and the input is
set correctly on the speakers.
• Check if there is signal output from the audio source.
• Make sure the speaker is switched to Bluetooth input, in other
audio input mode Bluetooth can not be paired or connected.
Disconnect from any Bluetooth device by press and hold the
" " button in Bluetooth mode, and then try again.
Cannot connect
• Effective Bluetooth transmission range is 10 meters, please
via Bluetooth
make sure operation is within the range.
• Try another Bluetooth device for connection.
• Check if mains power is connected, or if the wall outlet is
The A300Pro does
switched on.
not turn on
• AIRPULSE speakers generate little noise, while the background
noise of some audio devices are too high. Please unplug audio
Noise coming
cables and turn the volume up, there should be no sound can
from speakers
be heard at 1 meter away from this product.
• Move digital equipment or high-frequency equipment far away
from this product.
If you want to find out more about AIRPULSE, please visit our website at
www.airpulseaudio.com
Solution
22