Domo DO7057S Mode D'emploi page 21

· While steaming, it is normal to hear the water being pumped. This can also be felt in the handle.
· To remove wrinkles, press the steam plate against the material while steaming. Move the clothing
steamer over the material. Do be careful not to continue to steam the same location for too long.
· CAUTION: always be careful when using the steamer. The appliance and the steam are hot. Never aim
steam at people.
· Unplug the power cord after use.
· Allow the appliance to cool completely. Remove the water from the reservoir and store the appliance.
FILL THE WATER RESERVOIR
1. Press and hold the water reservoir release button and remove the reservoir from the appliance by
pulling it towards you.
2. Click open the filling opening. Fill the reservoir with water, making sure not to exceed the maximum
level. Use only mains water or 50 % mains water and 50 % de-mineralised water. Do not use
perfumed water. Click the filling opening closed again.
3. Replace the water reservoir in the appliance; you will hear a click.
BRUSH HEAD
The brush head can be used for thicker materials, furniture or removing hairs.
· Attach the brush head when the appliance is cool.
· Place the top of the brush head on the top of the appliance. Then fasten the bottom with a click.
· Always allow the appliance to cool completely before removing the brush head.
· Remove the brush head by lifting the lid on the top.
www.domo-elektro.be
21
DO7057S