Air Conditioner - Dandy DPAC5009 Guide D'utilisation Et Soins De Propriètaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AIR CONDITIONER

Note: The exhaust hose must be properly vented (outdoors) during air
conditioning mode.
1) Press the POWER SWITCH key (Fig. A) to switch on the unit, and the
previous set temperature will be shown in the temperature display area of the
control panel.
2) Press the MODE key (Fig. B) until the COOL indicator light illuminates on the
control panel (Fig. C). Each depression of the MODE key will advance to a
different mode setting (Cool - Dehumidifier - Fan)
3) Press the appropriate increase or decrease buttons (Fig. D) to select a suitable
operating temperature setting. Temperature settings are adjustable between
16°C (61°F) to 32°C (89°F).
4) Press the FAN key (Fig. E) to select the desired fan speed setting (Auto High-
Med-Low). Your selection will appear on the control panel (each depression of
the fan key will advance to a different setting).
• Cooling stops automatically when the set temperature is achieved. Cooling
resumes when the room temperature rises above the "set" temperature level.
FAN
Note: During Fan mode, the exhaust hose does not have to be vented outdoors.
1) Press the POWER SWITCH key pad to switch on the unit (Fig. A).
2) Press the MODE key (Fig. B) until the FAN indicator illuminates on the control
panel (Fig. G). Each depression of the MODE key will advance to a different
mode setting (Cool-Dehumidifier-Fan).
3) Press the Fan key (Fig. E) to select the desired FAN SPEED setting. Your
selection will appear on the control panel. Each depression of the fan key will
advance to a different fan speed (High-Med.-Low) as shown in Fig. F.
DEHUMIDIFIER
Note: During dehumidifier mode, the exhaust hose does not have to be vented
outdoors.
1) Press the POWER SWITCH key pad to switch on the unit (Fig. A)
2) Press the MODE key (Fig. B) until the DRY indicator illuminates on the control
panel (Fig. H). Each depression of the MODE key will advance to a different
mode setting (Cool-Dehumidifier-Fan).
IMPORTANT: There is no temperature adjustment during dehumidifier mode. If
the room temperature is greater than 25°C, the fan speed can be adjusted,
otherwise the fan speed is fixed at LOW speed.
OPERATION (cont'd)
6
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E
Fig. F
Fig. G
Fig. H

Publicité

Table des Matières
loading

Table des Matières