Slackline-Tools SLACKTIVITY Mode D'emploi page 16

Read the operating instructions through to the end before assembling the Slackline. Please note in
particular the warning notes and disclaimer.
I. CONTENT
16
Additionally:
2 Express-Rings included in the
25/35/45 m SlackTivity Kits
and 18 m Soft 'n Slack Kits
1 pulling aid included in the
35/45 m SlackTivity Kits
II. SETTING UP THE SLACKLINE
The tightening system of the Slackline is
based on a self-locking 5:1 pulley system.
The affixation of the Slackline is done by
the so called Slack-Locker principle (Fig. 4).
1 single Slack-Ring
1 cotton slack-bag
tree sling with Slack-Biner,
Slack-Ring and Tree-Friend
fixpoint 1
1 Slackline
2 adjustable
tree slings with
Slack-Biner and
affixed Slack-
Ring respectively
Steel-Ring
Fig. 1
pulley system
single Slack-Ring
Slackline
Fig. 2
4 Tree-Friends
fixpoint 2